LimbSaver Silent Quiver for Bow Hunting, One Piece, Lightweight and Low Profile, Works with Right and Left-Handed Bows, Fits All Arrow Sizes

what our customer say this product:

Powered by

1. John Stewart Verified Buyer – 21 April 2024

   The whole thing is extremely quiet. I am new to archery, but I put this quiver on my PSE Stinger X and it works flawlessly after a few hundred shots. It is fairly quiet when shooting, damn near silent when arrows go in or out and detaches / reataches relatively easily. To me it seems a little heavy and lists the bow to the right, but all in all I am pretty dang happy with it.
   

2. Amazomer Verified Buyer – 22 April 2024

   Missing a bolt and PLASTIC NUT on the quick attach mounting bracket.
   I knew I should have bought from a store!!!
   Mounting nuts are are plastic on the quick attach, and the latching mechanism is the same snap type design found on the battery compartment of a TV remote
   DONT WAIST YOU TIME buying this. Go to local store where where you can hold the item and confirm the material and if ALL the parts are there.
   

3. Calvin Verified Buyer – 11 June 2024

   THE EXACT SAME COLOR PATTERN OF MY BR33 VERY EASY TO REMOVE AND QUIET AND HOLDS ARROW VERY SOFTLY NO SNAP WHEN YOU REMOVE ARROW AND PLENTY OF ROOM FOR THE BROADHEADS WITHOUT MAKING CONTACT OVERALL A GREAT QUIVER I WISH IT WAS IN A SIX SPOT INSTEAD OF FIVE
   

4. Anonymous Verified Buyer – 2 July 2024

   Not a quick disconnect. Product made with cheap material. Not lightweight. Not worth $39.
   

5. Heetor Wald Verified Buyer – 30 August 2024

   I really want to like this thing, it’s a nice design. Silent, mounts to sight and didn’t effect POI. Dual snap in brackets for holding arrow and hood system really good. It’s the damn plastic attachment bracket. There were complaints about the clip on the bracket and the pins being too tight to get it on and off easily. They must have reduced the pins too much to make it easier to get on and off. Mine was so sloppy in the fit that it would jiggle away from the clip and fall off.

   I’m a hobby machinest and I don’t mind working on good gear to make it better. I pulled the pins out and threw them away, then I made new ones with a better press fit, and an exact interference fit with the bracket. Than tuned them with sandpaper and files until the fit very snug but could easily come on and off with a tiny bit of silicone lube. Fits great now and doesn’t rattle, but the damn clip on the bracket doesn’t engage any better than before, it can still fall off.

   Uhhggg can’t fix it. If they can get this fit right this will be a great quiver, Replaced the $170 dollar Mathews one with it, and I like it better, but have to do some more tuning on this one…
   

6. cowsndirt Verified Buyer – 16 September 2024

   Nice quiver for the price, there are definitely better Quivers on the market, but not for the money
   

7. Kody and Emilee Edmondson Verified Buyer – 20 November 2024

   Alright so I got this for my Matthews heli m. The bow is small and very lightweight. From the top of the quiver to the nock of my arrows is longer than my bow. Annoying but doable. Holds the arrows very secure. Awesome.
   It’s heavy. My bow was super light weight. Now it’s heavier. Doable. The one thing that completely took me by surprise. And my buddy’s didn’t believe me until they heard me shoot it. The quiver actually makes the bow quieter. Yes. Quieter. I couldn’t believe it. Awesome quiver
   

8. Anonymous Verified Buyer – 20 December 2024

   It works great
   

9. TWHMaR Verified Buyer – 26 January 2025

   Quiver seems to built well and holds arrows tight however it doesn’t work on sliding site or atleast not mine.

   

10. Mark Riberdy Verified Buyer – 5 February 2025

    The product has Deep Scratches and packaging appears to be Previously used! Very unfortunate, i will be returning for a full refund.
    

11. Dan Verified Buyer – 24 March 2025

    Vibrates loudly while shooting the bow. I’ve triple tightened everything and tried to add small rubber gaskets where plastic meets plastic to quiet it down, but still has a loud obnoxious rattle. Bought it to be silent, not very impressed.
    

12. tb Verified Buyer – 9 April 2025

    This comes as a right hand shooting sit up, I shoot left hand. I had to take the four screws of the quick disconnect and flip it over to turn it into a left-handed shooting set up. Also it did not line up on my bow, it kept hitting another mount, so I slid it up the rails to adjust it so it wouldn’t bind up on anyting. When mounted on the bow, it would not fit in the hard piano bow case that I have so I repositioned the quiver a little bit and moved my bow forward in the piano case closer to the latches now I can leave it on the bow and close the piano case lid. Pictures will be added so you can see the left hand setup and how it fits in my hard piano bow case. I have not used it in the field as of yet when I do I will update my review

    

13. Old Duffer Verified Buyer – 15 April 2025

    Bought this quiver because the one I had (made by a different manufacturer of plastic) broke at almost the slightest touch. This quiver is made of steel and heavy rubber material. It is VERY durable. Hunted with it on my bow this past week in the Rockies. Went through some pretty rough treatment and worked absolutely perfectly! This is a strong, robust quiver that will solidly mount five arrows. It won’t break like the other one did when you’re in the back country and can’t replace your quiver. Made tough. Priced reasonably.
    

14. Boaring Bruno Verified Buyer – 16 April 2025

    I enjoy the use of several Limb-Saver products. They are strong and and well built. This product was the same however it was bulkier and heavier than I wanted for my use. Return was not an issue with Prime. I will buy other Limb-Saver products. If they would make a smaller and lighter archery quiver I would likely buy it as well. Not sure why they only make one model for archery?